Single Chain Pipe Welding Clamp 4″ – 20″ (Stainless Steel)
Features & Benefits
- Alignment – Can align all pipe schedules accurately.
- Reforming – Jackscrews enable the elimination of ‘Hi-Lo’ points on either side of the weld joint. Can reform up to schedule 40 pipes.
- Adaptable – One chain clamp covers the range of 8 cage clamps.
- No Tack Jackbars – Joints can be fully welded without removing the clamp.
- Versatile – Elbows, tees, and other fittings can be accurately aligned using the Fitting Alignment Device.
- Quality – Jackbars are cast from high-quality steel alloys.
- Additional Jackbars – Can be added if extra pressure is required.
- Jackscrews – Jackbars have two jackscrews with independently pivoting pads to compensate for uneven surfaces.
- Stainless Steel – Available in both carbon and stainless steel versions.
All clamps include:
- Length of chain required for the pipe range
- Double jackscrew jackbars listed for the pipe range
- Main block
- Fine adjustment
- Fitting alignment device
- Jackscrew wrench
- Parts and operating manual
- Metal Storage box
- Hi-Lo gauge
Technical Details
| Part No. | Pipe Diameter Range “/mm | No. Of Jackbars | Reforms Pipe to Schedule | Aligns Pipe to Schedule | Shipping WT KGS |
|---|---|---|---|---|---|
| SCC12 | 1-12 / 25.4 – 304.8 | 4 | 40 | 80 | 12 |
| SCC12SS | 1-12 / 25.4 – 304.8 | 4 | 40 | 80 | 12 |
| SCC20 | 4-20 / 101.6 – 508 | 7 | 40 | 80 | 17 |
| SCC20SS | 4-20 / 101.6 – 508 | 7 | 40 | 80 | 17 |
| SCC36 | 10-36 / 254 – 914.4 | 8 | 40 | 80 | 42 |
| SCC36SS | 10-36 / 254 – 914.4 | 8 | 40 | 80 | 42 |
| SCC54 | 10-54 / 254 – 1371.6 | 13 | 40 | 80 | 82 |
| SCC54SS | 10-54 / 254 – 1371.6 | 13 | 40 | 80 | 82 |